ASCII(American Standard Code for Information Interchange) characters are represented by

Inverters are used

When Display using Phenomena potentially capable of Producing Light when the Display elements are
Electrically activated

If the numerical aperture of a fibre has a value of 1, this indicates that:

When transporting ESDs it is important to:

ECAM display modes

ECAM Modes

Transfer data from the airborne weather radar receiver to the aircraft’s radar display

Which is the major device in Micro Computer

Which one of the following is used to minimise reflections present in a bus cable:

MTICS in respect of Bonding Grounding Connections are made in anaircraft

Aperiodic EMI occurrenceis

Purpose of Secondary Bonding

ARINC 629 Physical Bus Medium

Generate all Single Character, Special Symbol , Straight&Curved Lines and arc on Display Unit

MTCS (Radio Altimeter)

Which memory is used to Host the Particular Software

The Output of a Bistable Circuit has

In EHSI Map Displayed provide two types of PredictiveInformation

MTCS disadvantage ( fibre Optics)

MTCS (MULTIPLEXER)

MTCS in CRT Combination Red + green

MTCS (ESD)

Effective Protection Against Lighting and Static Discharge damage to an aircraft requiresthat

MTCS (Clock Generator)

Potential of the grid at CRT

Each Flight Warning Computer of the system is equipped with module which
automatically checks data acquisition and processing modules

Reset Signal is

In electric Control System regulator controls

CPU detect problem it will save in

Final Anode CRT

Non active flight plan map data colour?

Which of the following DAC has highest accuracy…

Which type of modulation is used in ARINC-429 data bus system?

MTCS – ARINC 573

The accuracy of DAC depends on

Convert hexadecimal number A7 to decimal value…

Basic electronic flight instrument comprises of…………

The one`s complement of binary number is formed by……

The decimal 37 is equivalent to the binary coded decimal (BCD) number

Which logic gate are used to complement the logical state

If odd polarity is applied to the gate it give output high and if even polarity is applied the it give
low output then this is

When positive logic is applied to logic gate it works as OR gate. If negative logic is applied to the
same logic gate then it works as……..

Most appropriate logic family for use in a portable item of test equipment

Which provides the timing and control signal to computer system

The memory which is once programmed, can only read from is …………

The processor instruction HLT is classified as….

If the instruction is NEG (negate byte or word) then this is….

The data from control bus to out of the computer……….format is used to reduce number of wiring
circuitry

MTCS- Microprocessor clock

MTCS- multiplexor

The no of select lines to the four to one multiplexor

The main advantage of mono-mode fibers is…

The pulse of infra-red light travelling down a multimode fiber optic becomes stretched. This is
due to…

MTCS- Numerical aperture.

The potential at the grid of a CRT is ………….

A three beams in a colour CRT are associated with the………

Adjacent phosphors of red and green are illuminated on the screen of CRT. The resultant colour
produced will be:

In colour CRT display three separate signals are fed to the cathode which is corresponding to ….

Main classes of materials used for protecting static sensitive devices,these are

Electronic engine control (EEC) and Flight Guidance System (FGC) are the target hardware of
……software.

Typical example of target hardware for UMS includes…

The typical value of bonding, and grounding is………..

EMI can be conveyed from a source to a receiver by:

GPS segments are……..

The command bars on an ADI relate to:

An EADI display showing a moving runway moves down during the final stages of an approach. The aircraft must

Engine parameters are displayed on:

What is the fixed feature of an ADI?

If an EFIS has 3 symbol generators, what is the purpose of the 3rd symbol generator?

What instrument includes a display of a rising runway?

The FMS can update the IRS position outputs by using information from either: