EMI can be reduced by

User modifiable software upgraded without review by licensing authority

A logic device that produce a binary output code that indicate the value of logic 1 received on one of inputs is

CRT has advantage over LCD

Which ADC is fastest

Basic instruments gets input from air data system

Software configuration management plan (CMP) which controls software identification And change control is maintained by

Which one is the advantages of optical fiber

The loss within an optical fiber arises from

Negative on triboelectric series

Typical displays on an EHSI are

An ARINC 429 bus uses

Engine parameters are displayed on

FMS failure and warnings are

An FMS navigation database is updated

Fly-by-wire roll control is achieved by

A basic ARINC 429 data word has a length of:

The functions or capabilities of real-time, critical monitoring, module and/or subassembly failure isolation and go/no-go alarms are a function of

PCB are prone to which type of damage

Advantage of fibre optics

Grounding and bonding resistances of less than

The main advantage of using a serial bus in an aircraft is

The three beams in a color CRT are associated with the colors

When in-flight Landing Gear are in ON position and are locked, the illumination in the cockpit will be

When the input 01011 is passed from a NOT gate, what will be the output

EICAS gives

Adjacent green and red phosphorus are illuminated on the screen of a CRT. The resulting color will be

1012 converted to decimal is

An EADI display of flight director commands are coloured

Gates that will produce a logic 1 output whenever any one, or more, inputs
are at logic 1.

The logic circuit where state of digital signal is no change

gates will only produce a logic 0 output when all inputs are simultaneously
at logic 1.

A beam of light is directed from air to water

Fibre-optic cables use

A 32 bit computer has no. data lines

Which one of the following is used to minimize reflections present in a bus
cable?

Logical function of a combined logic circuit can be described by

In CRT electron beam is controlled by

Advantage of CRT over LCD is

In order to minimize the effects of reflection caused by a mismatch a bus
cable should be