MTCS

Size of the hard hammer is specified by

Cape chisel is used for

Fatigue produces

Sub-Surfaces corrosion are found by

Moving parts are identified by

MTCS, Taxiing

Spring are checked by

MTCS Ductility

Control Cables are checked by

Which process produce 20% stronger steel & limited to steel only

Surface & sub surface corrosion can be identified by

MTCS Malleability is

Null field dischargers are used for

which punch is having angle 300 to 600

Turn buckles, MTCS

Which line is composed of one long and two short dashes

Blades in which only teeth is hardened is called

Flux is used in welding

Blister are caused due to

Minimum Allowed rivet pitch is

Rivet Pitch, MTCS

Turnbuckle, MTCS

Difference between mating parts

Intentional Clearance is

Detail drawing-

Surface and subsurface crack without removing of coating-

The pin is customarily installed with the head up so that if cotter pin fail or works out the pin will remain in place

lines composed of one long and two short evenly spaced dashes-

To inspect the inside area that would not be otherwise inspected without disassembly-

MTCS-

Micrometer MTICS-

Average length of chord on tapered swept wing and joining L.E to T.E

Vanes, wing skin, wheels, bolt holes and spark plug cracks is detected by-

Burning and erosion is found in-

Gross weight – empty weight=

MTCS-

Residual flux

Which is a method of detecting invisible cracks and other defects in ferromagnetic materials such as iron and steel?

Bend shaft is measured by-

Accuracy with less than 0.001 ls measured by-

Silica gel after getting moisture

Correct diameter of drill is measured by-

Primary bonding resistance between bonded component and portion of main earthing system

low temperature brazing is-

MTCS about drill size-

—– fit is one having limits of size so prescribed that either a clearance or interference may result when mating parts are assembled

In brazing function of flux-

Marking on cable.

Dark brown colour is caused in bearing

—–may also be used, especially when dealing with large wire sizes and cable.

Crushing force is opposite to tension

5056 rivet is used for

Pulse-echo method has

Turn buckles, MTCS

For modification on both side

8 inch long, 1 inch wide coin dimpling

When EGT exceed specified limit

MTCS

MTCS

Procedure to carry out maintenance

MTCS.

MTCS about cape chisel

Cape chisel is used for

MTCS

ADF working range

Safety and quality policy shall include a statement of

Steel and Aluminium melting points are

Which process produce 20% stronger steel & limited to steel only

which punch is having angle 300 to 600

Which of the following is used to modify a signal

Colour of defects in fluorescent inspection

Flexible hole flexibility should be

Type of fire in which dry powder is used

Spring when overheated then when will happen

What shall we done when storing A/C in cold weather

Blades in which only teeth is hardened is called

Flux is used in welding

Conductor squareness or rectangular size measured by

Which type of drill are used for soft and thin materials